Micromod MOD: 30ML Operation and Template Setup Manual de usuario descargar pdf (Pagina 37)

MOD 30ML Multiloop Controller

OPERATION

3-5

Unacknowledged

with Bad Quality:

An unacknowledged alarm is present and the alarm input

has bad quality. The A key can be used to acknowledge the

alarm on the input. Bad quality must be separately

acknowledged on a Data Quality Alarm Display.

Acknowledged

with Bad Quality:

An alarm on an input with bad quality has been

acknowledged but is still active (alarm condition still exists

and bad quality remains unacknowledged).

Clear: An alarm has been acknowledged and is no longer active.

3.4.3 Line 4 Displays

This is the 3-character status display located next to the R/L key.

Local: Set-point is derived at the instrument and can be

adjusted using the Up (∆) and Down (∇) keys. Line 6

displays the Set-point value.

Remote: Set-point is derived from a remote location and is

brought into the instrument through the built-in input

circuit or an input module.

Track: Controller is in manual and set-point is tracking the

process input to provide a bumpless transfer when the

controller is switched to auto.

Return: An alarm display is present on the front panel. The R/L

key can be used to return to the runtime display

Previous: Instrument is in the Tune mode and [NXT] appears on

Line 5. The R/L key can be used to return to the

previous tune parameter.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

Sin comentarios

Micromod MOD: 30ML Operation and Template Setup Manual de usuario Pagina 37