Micromod MOD: Modcell 2050R 2050FZ0, QS-1300/1400 to 2050R Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Micromod MOD: Modcell 2050R 2050FZ0, QS-1300/1400 to 2050R . Micromod MOD: Modcell 2050R 2050FZ0, QS-1300/1400 to 2050R Conversion Accessory User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Conversion Instructions for
QS-1300/1400 Conversion Accessory to MODCELL 2050
Accessory Part Numbers: 2050FZ00000A, 2050FZ00001A
INTRODUCTION
The MODCELL 2050 conversion accessory allows MODCELL 2050 to fit into an existing QS-1300 or QS-
1400 Slide-Guide installation. No external equipment such as instrument cables, power supplies or
termination panels are required. These instructions cover the procedure for the physical installation of
the QS-1300 conversion brackets onto a standard MODCELL 2050 housing, Slide-Guide installation and
limited electrical instructions.
Pages 3 through 10 include instructions for installation of the Direct Connect Cable when a
2050FZ00001A kit is being used. This feature provides the quickest installation while retaining the
original instrument cable. Ignore pages 3 through 10, if you are using the 2050FZ00000A conversion kit.
Parts Required: 2050FZ00000A or 2050FZ00001A Conversion Accessory
metal brackets (3)
1/8" pop-rivets (6)
Direct Connect Cable (1) [available in the 2050FZ00001A kit only]
MODCELL 2050 Single Loop Controller (1)
Tools Required: Pop-rivet gun
PROCEDURE
Removal of the MODCELL 2050 instrument from the instrument housing is not required.
1. Remove the brackets and pop-rivets from the package. Be sure all parts are present.
2. Secure the three brackets to the MODCELL 2050 using the pop-rivet gun, and 1/8" pop-rivets
supplied in conversion the kit (see Figure 1). All six rivets are inserted through the bracket and
into the housing.
3. Remove the QS-1300/1400 instrument from the Slide-Guide. Insert the MODCELL 2050 in
place of the old instrument. MODCELL 2050 should latch in place like the QS-1300/1400
instrument did.
4. Connect wiring. When using kit number 2050FZ00000A, field I/O wiring for MODCELL 2050 may
be accomplished by cutting off the QS-1300 instrument connector and wiring directly to the
MODCELL 2050 termination block. See Table 1 for most common I/O configurations.
Figure 1. Mounting 2050R in Slide Guide
Vista de pagina 0
1 2 3 4 5 6 7 8 9 10

Indice de contenidos

Pagina 1 - Conversion Instructions for

Conversion Instructions for QS-1300/1400 Conversion Accessory to MODCELL 2050 Accessory Part Numbers: 2050FZ00000A, 2050FZ00001A INTRODUCTION The M

Pagina 2

92902-88 2050F Conversion Instructions The Company’s policy is one of continuous product improvement

Pagina 3

92902-88 2050F Conversion Instructions WARNING Avoid electrical shock. AC power wiring must not be connected at the distribution panel (ac sour

Pagina 4 - Not Used

92902-88 2050F Conversion Instructions Conversion Instructions for QS-1300 Conversion Accessory to MODCELL 2050 when using the Direct Connect Cab

Pagina 5

92902-88 2050F Conversion Instructions MODCELL 2050 to Quick-Scan 1300R &1310R Series Direct Connect Cable Option Termination Connections to

Pagina 6

92902-88 2050F Conversion Instructions 2. When MODCELL 2050s relays are configured for use as alarms, the relay will be on (fail-safe condition)

Pagina 7

92902-88 2050F Conversion Instructions MODCELL 2050 to Quick-Scan 1320R &1330R Series Direct Connect Cable Option Termination Connections to

Pagina 8

92902-88 2050F Conversion Instructions 2. This input configuration is for .25 - 1.25 Vdc where the controller supplies 24Vdc to the transmitter

Pagina 9

92902-88 2050F Conversion Instructions MODCELL 2050 to Quick-Scan 1340R &1350R Series Direct Connect Cable Option Termination Connections to

Pagina 10

92902-88 2050F Conversion Instructions Limitations: Float and lock commands, deviation monitor (±10 Vdc) and external feedback (±10 Vdc) are not

Comentarios a estos manuales

Sin comentarios