Micromod MOD: 30ML Controller Operation and Maintenance Tra Manual de usuario descargar pdf (Pagina 30)

Training Manual

Single Loop Template Lab

3 - 8

Figure 3 .8.

18 Press NXT key, then press the UP

key

You are exiting the COMMAND section

19 Press NXT key XTIMES is displayed on Line 2. Scan groups 1

through 5 are user-defined intervals for loops.

The fastest group has the highest priority. The

lower numbered group has a higher priority if the

interval is the same.

Scan group 6 is a system group. Scan groups 7

to 9 are communications groups.

20 Press NXT key TIME is displayed on Line 2. Current time. The

instrument maintains this time even when off.

Always keep set to current time

21 Press NXT key. DATE is displayed on Line 2. Current date. The

instrument maintains this date even when off.

Always keep set to current date

22 Press NXT key DAY is displayed on Line 2. Current day (Sunday

= 1, Saturday = 7). The instrument maintains this

day even when off. Always keep set to current

day.

23 Press NXT key DEV STAT is displayed on Line 1 and DEVICE is

displayed on Line 2.

24 Press UP key. You are now at the “top” level of the template

configuration tree. Line 1 will display DEVICE

and Line 6 will display DEV STAT

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

Sin comentarios

Micromod MOD: 30ML Controller Operation and Maintenance Tra Manual de usuario Pagina 30