Micromod MOD: 30ML Functions Data Base Reference Manual de usuario descargar pdf (Pagina 91)

MOD 30ML Data Base Reference

BUILT-IN ANALOG OUTPUT BLOCK

07 Active I/O communications Error (COMMERRA)........................................................... – – R

If the I/O communications error diagnostic is enabled, this active diagnostic status

indicates if the error is active even after acknowledgement. The status can be read

as follows.

YES 1 Diagnostic error is active.

NO 0 Diagnostic error is not active.

OUTPUT Error (OUTERRS) .............................................................................................. CWR

The analog output error diagnostic is a status indication for the output circuit error

code (see attribute #12). The diagnostic can be suppressed or enabled as follows.

SUPPRESS 1 Diagnostic error is suppressed. Acknowledgement status remains

clear.

ENABLE 0 Diagnostic error is not suppressed and errors are reported to the

System Event block.

09 Unacked Output Error (OUTERRU) .................................................................................– WR

If the analog output diagnostic error is enabled, this unacknowledged status

indicates if the diagnostic is or is not acknowledged. The status can be

acknowledged or read as follows.

YES 1 Diagnostic error is unacknowledged.

NO 0 Diagnostic error is acknowledged.

10 Active Output Error (OUTERRA) ..................................................................................... – – R

If the analog output diagnostic error is enabled, the active status indicates if the

error is active even after acknowledgement. The status can be read as follows.

YES 1 Diagnostic error is active.

NO 0 Diagnostic error is not active.

Output Number (OUTNUM) .............................................................................................. CWR

The analog output number.

1 The analog output is connected to Output 1 of the built-in circuit.

2 The analog output is connected to Output 2 of the built-in circuit.

12 Output Circuit Error (ERROR) .........................................................................................– WR

This error code indicates the reason for report of an Output Error diagnostic

(attribute #08).

0 No error

1 Output too low

2 Output too high

2-83

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 151 152

Sin comentarios

Micromod MOD: 30ML Functions Data Base Reference Manual de usuario Pagina 91