Micromod Micro-DCI: 53SL6000 Single Loop Controller Manual de usuario Pagina 119
- Pagina / 138
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
WARNING:
Always remove power before
attempting to install, disassemble, or service the
controller. Failure to remove power may result in
serious personal injury and/or equipment damage.
CAUTION:
- Use a grounded wrist strap to prevent
damage to integrated circuit devices when handling
circuit boards.
NOTE:
- When communicating with MicroMod
for replacement parts, reference the
controller’s serial number to ensure the correct
replacement is supplied. The necessary ordering
information is provided on the instrument data tag
and on the manufacturing specification sheet
supplied with the controller.
Table B-1. Parts List
Item
Number
Part Number Description
1 698B235U01 Display Assembly
(Bezel, Display Board,
Front Membrane, and
Gasket)
2 333B016U01 Gasket only
3 173D078U01 Cable Assembly
4 686B736U01 Power Supply - 120/240 V
AC
4 Power Supply - +24 V DC
5 324A528U01 Case - Molded
6 353F064U01 Mounting Bracket only
7 396C272U01 Screw for mounting
bracket
8 090H022U01 Ground Screw
9 172G440U01 Plug - 3P
10 172G440U03 Plug - 12P
11 682A550U01 Single Universal AI3
Module
11 682A550U02 Dual Universal AI3/AI4
Module
12 172F464U04 Plug - 8P
13 172F464U03 Plug - 6P
14 172F464U01 Plug - 4P
15 682A551U01 2DI/2DO Module
16 014F010T10 4-40 x 5/8 Screw
17 172F464U02 Plug - 5P, RS-422/485
17 172F464U07 Plug - 5P, RS-232
18 682A552U01 RS-422/485 Module
18 682A552U02 RS-232 Module
19 014F004T10 4-40 X 1/4 Screw (2 per
module)
20 101W796U01 Retainer (O-Ring - 2 per
module)
21 338F104U01 Identification Tags
(Strip of 3 tags)
Table B-1. Parts List
Item
Number
Part Number Description
22 355J093U01 Black Mounting Collar -
Single Unit
22 614B836U01 Black Mounting Collar - 2
Unit
22 614B836U02 Black Mounting Collar - 3
Unit
22 614B836U03 Black Mounting Collar - 4
Unit
22 614B836U04 Black Mounting Collar - 5
Unit
22 614B836U05 Black Mounting Collar - 6
Unit
22 614B836U06 Black Mounting Collar - 7
Unit
22 614B836U07 Black Mounting Collar - 8
Unit
22 614B836U08 Black Mounting Collar - 9
Unit
22 614B836U09 Black Mounting Collar - 10
Unit
23 107J013U01 Screwdriver
B.3 Removal and Replacement
Ensure the power is off and disconnect the power
cable plug. Disconnect all cable shield connec-
tions from the ground stud; remove the signal plug
and any option modules from the rear of controller.
A single screw secures the RS-232 or RS-485 mod-
ule to the casework; and the slot A and slot B
option modules are each secured to the casework
with two screws.
The display assembly is secured to the case by
bezel tabs that extend from the assembly into the
case. As shown in Figure B-2, to remove the dis-
play assembly, gently press in the bezel tab with
the screwdriver tip to release it from the case de-
tent, then slide the display assembly forward just
enough so the tab notch is passed the detent. Re-
peat for the remaining four bezel tabs to remove
display assembly from case. Disconnect the cable.
The display assembly must be replaced as a unit
because the display board is staked in place.
Lever latches secure the power supply board inside
the case. Gently pull each lever tab at the back of
the case as the power supply board edge is tilted
passed the lever latch inside the case. The board
comes straight forward out of the case.
Replacement: connect cable to new power supply
board and insert it in case until it is latched. Power
sockets, signal connectors, and ground stud should
be properly aligned with case cut-outs. Connect
53SL6000 Instruction Manual Appendix B. Maintenance and Parts List
B-2
PARTS
- INSTRUCTION MANUAL 1
- MicroMod Automation, Inc 2
- Table of Contents 3
- 4.0 Functional Overview 4-1 4
- 5.0 Inputs/Outputs (I/O) 5-1 4
- 9.0 Commissioning 9-1 6
- Appendix A: Glossary A-1 7
- Appendix D: Prompt List D-1 7
- List of Tables 8
- List of Figures 9
- Safety Summary 11
- READ FIRST 12
- 1.0 Introduction 13
- 1.2 Controller Model Numbers 15
- 1.3 Product Specifications 15
- Thermocouple List 18
- 2DI/2DO Option Module 18
- CPU Cycle Time 19
- Control Ranges 19
- 2.1 Inspection 20
- 2.2 Site Location 20
- 2.3 Panel Mounting 20
- 2.4 Power Connections 20
- 2.5 Signal Connections 22
- 2.5.4 Analog Output AO1 23
- Signal Wiring 24
- 2.7 2DI/2DO Module 25
- 2.9 Applying Power 26
- 2.9.1 Power-up Sequence 27
- 3.0 Display Panel 28
- 3.4 Operator Mode Overflow/ 31
- Underflow Indication 31
- 3.5 Engineer Mode 32
- Backward 33
- 3.6 Entering a Pass-Key 35
- 3.7 Offline Display Pattern 35
- 3.9 Display Alphanumerics 38
- 3.10 Engineer Mode Summary 38
- 4.0 Functional Overview 40
- 4.2 Detailed Block Diagram 41
- 5.0 Inputs/Outputs (I/O) 45
- Parameter Entries 46
- Table 5-6. RTD Types 47
- 5.4 Analog Output 1 (AO1) 48
- 5.5 Discrete Inputs 49
- 5.6 Discrete Outputs 49
- 6.1 Section Overview 51
- 6.2 Characterizer 51
- 6.2.1. 3SEG Mode 52
- 6.2.2 LSEG Mode 52
- 6.2.3 PrGM Mode 53
- 6.3 Math Function Block 54
- 6.3.1 ALG Mode 55
- 6.3.2 SuMM Mode 55
- 6.3.3 PoLY Mode 56
- 6.3.4 PoWr Mode 56
- 6.3.5 LoG Mode 56
- 6.3.6 LiM Mode 56
- 57
- 7.0 Control Scheme Block 59
- Schemes 64
- Control Scheme 65
- 7.7 Control Loop Parameters 83
- 7.8 Control Scheme Signal 86
- 8.0 Eight Control Strategies 88
- 8.2 Analog Back-Up Control 90
- 8.3 Ratio Control 92
- 8.4 Auto/Manual Selector 94
- Out 95
- 8.4.8 SchM Selection 95
- 8.5.2 AI2 - Primary PV Input 96
- 8.6.1 AI1 - Primary PV Input 98
- 8.7 Dual Indicator with 100
- Re-Transmitted PV 100
- Control 101
- 8.8.3 Speed Factor Adjusting 103
- 9.0 Commissioning 104
- 9.8 Easy-Tune 106
- Actual Curve 107
- Approximated Curve 107
- 9.8.1 Executing Easy-Tune 108
- Appendix A: Glossary 112
- B.1 Overview 118
- B.2 Parts List 118
- B.3 Removal and Replacement 119
- Procedure 120
- B.5 Defaulting the Database 123
- B.6 Analog Input/Output 123
- Calibration Values 123
- B.7 Watchdog LED 123
- C.1 Overview 124
- C.2 Configuring the System 124
- Module for Datalink 124
- C.3 Protocol 124
- C.3.1 Message Types 125
- C.3.2 Transaction Examples 125
- Reference 126
- Cross Reference 128
- Reference 129
- via Datalink 131
- Appendix D: Prompt List 132
Relacionado con productos y manuales para Equipo Micromod Micro-DCI: 53SL6000 Single Loop Controller
(99 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.077 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales